Rocking Slab Stabilization
One of the greatest enemies to forklifts is uneven or rocking slabs. Our polyurethane foam jacking solution is an ideal application for stabilizing, void filling, and re-leveling slabs, helping make sure they don’t move again. The process is:
- Fast and Minimally Invasive
- No Excavation
- Cost Effective
- Stabilize Soils
- Lift, Level and Realign
Rocking Slab Stabilization
One of the greatest enemies to forklifts is uneven or rocking slabs. Our polyurethane foam jacking solution is an ideal application for stabilizing, void filling, and re-leveling slabs, helping make sure they don’t move again. The process is:
- Fast and Minimally Invasive
- No Excavation
- Cost Effective
- Stabilize Soils
- Lift, Level and Realign
How it works!
1. Polyurethane is injected into the void through the slab.
2. Polyurethane begins to expand and pack the void.
3. Once the void is filled, the polyurethane begins to exert upward force.
Why Polyurethane Injection?
Our polyurethane injection process is cost-effective and requires no excavation. Once injected, the polymer aggressively seeks out voids, like how water seeks the path of least resistance. After a few short minutes the polymer reacts and begins to expand throughout the voids and the weak points in the soil. The polymer expands and then hardens to create a densified and compacted layer of soil that can now support the weight of the above structure.
- Injections are made through 5/8” holes that are drilled through the slab
- Once Injected, the polyurethane travels throughout the voids and expands up to 25 times through the soil
- The polyurethane cures to 95% capacity within 25 minutes
WHY OUR PROCESS IS SO EFFECTIVE FOR ROCKING SLAB STABILIZATION
Our polymer injection application is a no excavation rocking slab stabilization solution, allowing for minimal impact to your structure. Our project footprint is minimal, requiring a small trailer, a hose running from the trailer, and small 5/8″ holes that are drilled through the structure to give us access to drive our rods to target locations and inject our high-density polyurethane.
Our polymers are light-weight and add minimal weight to the area. This is a major advantage because often times treatment is required because the added weight is to much for the geology of the area.
Our polymers set up to 95% capacity within 15 minutes, unlike other solutions which require 24-48 hours and ideal soil conditions. After 15 minutes, the material can be driven on and take on heavy loads.
Our polymers are environmentally inert and have no impact to the environment or groundwater
Not only is our process the fastest and most effective foundation and slab lifting application, but it is the most cost-effective too.
Benefits
- Rocking Slab Stabilization
- Slab Lifting and Realignment
- Filling Voids Underneath the Slab
- Stabilizing and Strengthening Weak Soils Beneath the Slab
- Preventing Future Soil Washout
- No Excavation and Minimal Mess
- Avoid Having to Pour a New Slab
- Environmentally Friendly Polymers